メインコンテンツにスキップ

iRobot Roomba 770 Brush Replacement

  1. iRobot Roomba 770 Brush Replacement, Brush: 手順 1、 1の画像 1
    • Orient the roomba so it is upside down and the dust tray is closest to you.

  2. iRobot Roomba 770 Brush Replacement: 手順 2、 2の画像 1 iRobot Roomba 770 Brush Replacement: 手順 2、 2の画像 2
    • Locate the two yellow tabs on the screen that covers the brushes.

    • Push inwards on the yellow tabs while simultaneously pulling upwards on the attached grey cage.

  3. iRobot Roomba 770 Brush Replacement: 手順 3、 3の画像 1 iRobot Roomba 770 Brush Replacement: 手順 3、 3の画像 2 iRobot Roomba 770 Brush Replacement: 手順 3、 3の画像 3
    • Grab the right side of the larger brush that is located near the yellow cap. Pull upwards and to the right to remove the brush.

    • Repeat the same steps with the smaller brush.

  4. iRobot Roomba 770 Brush Replacement: 手順 4、 2の画像 1 iRobot Roomba 770 Brush Replacement: 手順 4、 2の画像 2
    • Orient the brush so the yellow tab is on the right hand side.

    • Pull the yellow tab to the right to remove.

    • Remove any debris, paying attention to the ends as well as the brush itself.

    • Replace any damaged brushes.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Andrew Horvath

メンバー登録日: 10/05/16

444 ポイント

3のガイドは作成済み

チーム

Cal Poly, Team 15-3, Livingston Fall 2016 Cal Poly, Team 15-3, Livingston Fall 2016人のメンバー

CPSU-LIVINGSTON-F16S15G3

3 メンバー

5のガイドは作成済み

コメント 1 件

My roomba starts and moves a foot or so and then stops. I have cleaned it entirely, the battery is fine and the wheels are clean. Anyone have a suggestion

Mary Ann Dyer - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 14

今までの合計 2,268