iRobot Roomba 4100 Main Brush Replacement - iFixit 修理ガイド

はじめに

This is an easy guide. It should only take a few minutes to complete and it doesn't require any tools.

手順1 Brush Guard

iRobot Roomba 4100 Main Brush Replacement, Brush Guard: 手順 1、 1の画像 1

Lay the Roomba upside down on a flat surface with the blue strip away from you.

手順2

iRobot Roomba 4100 Main Brush Replacement: 手順 2、 2の画像 1

iRobot Roomba 4100 Main Brush Replacement: 手順 2、 2の画像 2

Use your index fingers to pull the yellow tabs towards you.
While still pulling the yellow tabs with your index fingers, tilt up the brush guard.
For reassembly, make sure to push in the brush guard until it clicks into place.

手順3

iRobot Roomba 4100 Main Brush Replacement: 手順 3、 1の画像 1

Pull back the brush guard to unhook it from the latches.
Remove the brush guard by lifting it up and out of the Roomba.
This picture has a change in orientation to illustrate the latches. Continue disassembling the Roomba with the blue strip away from you.

手順4 Main Brush

iRobot Roomba 4100 Main Brush Replacement, Main Brush: 手順 4、 1の画像 1

Set the brush guard aside.
The main brush is the bristly one that is closest to the blue strip.

手順5

iRobot Roomba 4100 Main Brush Replacement: 手順 5、 2の画像 1

iRobot Roomba 4100 Main Brush Replacement: 手順 5、 2の画像 2

Remove the main brush by grabbing it and pulling it up and out of the Roomba.
For reassembly, orient the Roomba with the battery closest to you:
First, insert the black end of the main brush into the black square opening on the right side.
Second, lay the main brush back into place.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

4人の作成者と共同で作成されました。

Samantha Barrett

メンバー登録日: 01/13/14

501 ポイント

5のガイドは作成済み

チーム

Cal Poly, Team 17-5, Forte Winter 2014 Cal Poly, Team 17-5, Forte Winter 2014人のメンバー

CPSU-FORTE-W14S17G5

5 メンバー

6のガイドは作成済み

0 件のコメント

統計データ:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 6

今までの合計 792