iRobot Roomba 4100 Brush Guard Replacement - iFixit 修理ガイド

はじめに

Removing the brush guard will be easy. It won't take more than 5 minutes to complete and no tools are required.

手順1 Brush Guard

iRobot Roomba 4100 Brush Guard Replacement, Brush Guard: 手順 1、 1の画像 1

Lay the Roomba upside down on a flat surface with the blue strip away from you.

手順2

iRobot Roomba 4100 Brush Guard Replacement: 手順 2、 2の画像 1

iRobot Roomba 4100 Brush Guard Replacement: 手順 2、 2の画像 2

Use your index fingers to pull the yellow tabs towards you.
While still pulling the yellow tabs with your index fingers, tilt up the brush guard.
For reassembly, make sure to push in the brush guard until it clicks into place.

手順3

iRobot Roomba 4100 Brush Guard Replacement: 手順 3、 1の画像 1

Pull back the brush guard to unhook it from the latches.
Remove the brush guard by lifting it up and out of the Roomba.
This picture has a change in orientation to illustrate the latches. Continue disassembling the Roomba with the blue strip away from you.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

4人の作成者と共同で作成されました。

Samantha Barrett

メンバー登録日: 01/13/14

501 ポイント

5のガイドは作成済み

チーム

Cal Poly, Team 17-5, Forte Winter 2014 Cal Poly, Team 17-5, Forte Winter 2014人のメンバー

CPSU-FORTE-W14S17G5

5 メンバー

6のガイドは作成済み

0 件のコメント

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 703