修理を始めるには コミュニティ ストア

iRobot Braava 380t Motor Replacement

はじめに

Is your Braava not moving or spinning in circles? Check the wheels. If they are okay then the motor needs replacement.

必要な工具と部品

    • Flip Braava upside down and loosen the screw between the two wheels.

    編集

    • Lift the battery and disconnect the wire connecting the battery.

    編集

    • Remove the cleaning pad and the four screws above the battery cavity.

    編集

    • Flip Braava onto its wheels and pull the cover from the front. Take out the wire the connects the body and the cover.

    編集

    • Hold the wheel of the defective motor and turn the wheel cover clockwise and take it out when it stops turning.

    編集

    • Use a tweezer to take out the black clip that holds the wheel. Be careful: The clip can fly off.

    編集

    • Pull out the wheel and take out the silver plate and two screws that hold the washer.

    編集

    • Flip Braava upside down and peel back the sticker of the defective side and take out four screws. This will get you to the motor.

    編集

    • Take out the cover and the cable that holds the motor. It is at the bottom corner of the motherboard. The left motor is at the left corner and the right motor is at the right corner.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

1人の作成者と共同作成されました。

Glowing_Ice

メンバー登録日: 06/21/20

169 ポイント

1ガイドが承認済み

バッジ: 1

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 5

過去 30 日: 9

今までの合計 740