修理を始めるには コミュニティ ストア

iRobot Braava 320 Wheel Replacement

はじめに

Without properly functioning wheels, the Braava will have a difficult time navigating. This will lead to inefficient sweeping or mopping. This guide will show how to replace the Braava's wheels.

必要な工具と部品

  1. iRobot Braava 320 Wheel Replacement, Battery: 手順 1、 1の画像 1

    • Flip your device over and locate the battery cover.

    • The battery cover is located in the center of the device in between both wheels.

    編集

  2. iRobot Braava 320 Wheel Replacement: 手順 2、 1の画像 1

    • Using a Flathead #4 screwdriver, gently turn the 12mm screw that holds the battery cover in.

    • The screw does not remove, it stays attached to the cover.

    編集

  3. iRobot Braava 320 Wheel Replacement: 手順 3、 2の画像 1 iRobot Braava 320 Wheel Replacement: 手順 3、 2の画像 2

    • Gently remove the battery from the tray and disconnect the battery cable.

    • To remove the battery, pull it straight up. To disconnect the cable, gently pull it straight out of the connector.

    • To reinstall the cable, hold it near the end and gently push it in the connector.

    編集

  5. iRobot Braava 320 Wheel Replacement, Body Shell and Control Panel: 手順 4、 1の画像 1

    • With the battery removed, rotate your device so the front of it is facing you.

    • Remove the four 10mm Phillips #2 screws that attach the shell.

    編集

  6. iRobot Braava 320 Wheel Replacement: 手順 5、 2の画像 1 iRobot Braava 320 Wheel Replacement: 手順 5、 2の画像 2

    • Using both hands, hold the device together while you flip it over.

    • Starting from the front, gently lift up the shell and slowly tilt back until it is fully removed.

    編集

  7. iRobot Braava 320 Wheel Replacement, Wheel: 手順 6、 3の画像 1 iRobot Braava 320 Wheel Replacement, Wheel: 手順 6、 3の画像 2 iRobot Braava 320 Wheel Replacement, Wheel: 手順 6、 3の画像 3

    • To remove the wheel covers, hold the wheel in place with one hand while turning the cover clock-wise with the other.

    • The cover should come off as soon as you hear a 'click' sound.

    • When replacing the cover, align the notches on the cover just to the right of the ones on the wheel.

    編集

  8. iRobot Braava 320 Wheel Replacement: 手順 7、 3の画像 1 iRobot Braava 320 Wheel Replacement: 手順 7、 3の画像 2 iRobot Braava 320 Wheel Replacement: 手順 7、 3の画像 3

    • Using a small Flathead screwdriver, remove the small black clip in the center of the wheel.

    • To ensure the clip does not fly off, place your hand over the wheel to cover it as you remove the clip.

    編集

  9. iRobot Braava 320 Wheel Replacement: 手順 8、 3の画像 1 iRobot Braava 320 Wheel Replacement: 手順 8、 3の画像 2 iRobot Braava 320 Wheel Replacement: 手順 8、 3の画像 3

    • Once the small black clip is removed, the wheel should come off by gently pulling on it.

    • Be careful not to lose the two small chrome pieces located on each side of the wheel.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

13 の人々がこのガイドを完成させました。

作成者

2人の作成者と共同で作成されました。

Ruven Tapia-Vargas

メンバー登録日: 02/28/17

381 ポイント

1ガイドが承認済み

バッジ: 7

+4 個以上のバッジ

チーム

USF Tampa, Team S1-G3, Nance Spring 2017 USF Tampa, Team S1-G3, Nance Spring 2017人のメンバー

USFT-NANCE-S17S1G3

4 メンバー

10のガイドは作成済み

コメント 1 件

O roteiro descritivo para a troca das rodas do Braava foi muito útil. Obrigada!

Vanilda Chueiri - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 6

過去 30 日: 51

今までの合計 9,723