メインコンテンツにスキップ

はじめに

This guide will help you in identifying the soldering joints locations for the loud speaker on the iPod Touch 4th Generation

  1. I've boxed where the ribbon cable connectors go for the screen and camera. The soldering joints are marked with a Blue and a Red dot to indicate where to solder the speaker wires.
    • I've boxed where the ribbon cable connectors go for the screen and camera.

    • The soldering joints are marked with a Blue and a Red dot to indicate where to solder the speaker wires.

    • The second picture shows the wires soldered to the logic board.

    • The loud speaker replacement was very tedious job.. anyways Good Luck

終わりに

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

Tysl332

メンバー登録日: 2014年02月11日

289 ポイント

1ガイドが承認済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 2

過去 7 日: 3

過去 30 日: 3

今までの合計 6,310