メインコンテンツにスキップ

iPod Touch 2nd Generation Power/Volume Controls Replacement

必要条件のみ
この修理ガイドは、他のガイドの前提条件として使用されます。それ自体は不完全で、単独で使用されることはありません。

必要な工具と部品

  1. iPod Touch 2nd Generation Power/Volume Controls Replacement, Power/Volume Controls: 手順 1、 1の画像 1
    • Remove the two Phillips screws securing the power/volume controls to the rear panel.

  2. iPod Touch 2nd Generation Power/Volume Controls Replacement: 手順 2、 1の画像 1
    • Use the tip of a spudger to remove the yellow kapton tape covering the power/volume control ribbon cable.

  3. iPod Touch 2nd Generation Power/Volume Controls Replacement: 手順 3、 1の画像 1
    • Remove the two Phillips screws securing the power/volume controls to the rear panel.

    • Lift the power/volume controls out of the rear panel.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

4人の作成者と共同で作成されました。

Walter Galan

693,936 ポイント

1,203のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 2,522