はじめに

Remove the rear panel to access the internals of your Shuffle.

パーツ

パーツは必要ありません。

  1. Accessing the internals of the 4th generation Shuffle is extremely difficult, as the rear panel is both glued to the front case and secured by metal retaining clips. It is highly unlikely that you will be able to remove the rear panel without inflicting cosmetic and/or structural damage.
    • Accessing the internals of the 4th generation Shuffle is extremely difficult, as the rear panel is both glued to the front case and secured by metal retaining clips. It is highly unlikely that you will be able to remove the rear panel without inflicting cosmetic and/or structural damage.

    • Before proceeding, be sure your Shuffle is switched off.

    コメントを追加する

  2. Use a combination of iPod opening tools and metal spudgers to pry the rear panel away from the Shuffle by the seam nearest the ON/OFF switch.
    • Use a combination of iPod opening tools and metal spudgers to pry the rear panel away from the Shuffle by the seam nearest the ON/OFF switch.

    コメントを追加する

    • Remove the rear panel from the Shuffle.

    コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

Walter Galan

568,545 ポイント

1,203のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 2

過去 7 日: 9

過去 30 日: 29

今までの合計 8,084