はじめに
Replace a damaged rubber control button cover.
必要な工具と部品
-
-
Remove the single 2.1 mm Phillips screw securing the logic board to the front case.
-
-
-
-
Remove the following four screws:
-
Two 1.2 mm Phillips screws with large heads.
-
Two 1.6 mm Phillips screws with small heads.
-
もう少しです!
To reassemble your device, follow these instructions in reverse order.
終わりに
To reassemble your device, follow these instructions in reverse order.
2 の人々がこのガイドを完成させました。
2 件のコメント
Great job my friend