iPod Shuffle 3rd Generation Rear Case Replacement - iFixit 修理ガイド

はじめに

Replace the rear case on your iPod shuffle for a shiny new clip.

必要な工具と部品

手順1 Rear Case

iPod Shuffle 3rd Generation Rear Case Replacement, Rear Case: 手順 1、 1の画像 1

Widen the small gap between the front and rear case by inserting a metal spudger into the gap near the top of the iPod.
Be careful when using a metal spudger, as you may scratch the outer case.

手順2

iPod Shuffle 3rd Generation Rear Case Replacement: 手順 2、 2の画像 1

iPod Shuffle 3rd Generation Rear Case Replacement: 手順 2、 2の画像 2

Insert an iPod opening tool into the newly widened gap, and pry the rear case up and away from the front case.

手順3

iPod Shuffle 3rd Generation Rear Case Replacement: 手順 3、 1の画像 1

Insert the iPod Shuffle opening tool into the gap between the front and rear case on the same side, at the bottom corner of the iPod.
Pry the rear case away from the front case.

手順4

iPod Shuffle 3rd Generation Rear Case Replacement: 手順 4、 1の画像 1

Lift the bottom of the rear case and remove it from the rest of the iPod.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

3人の作成者と共同で作成されました。

Matthew Newsom

メンバー登録日: 01/05/10

39,500 ポイント

67のガイドは作成済み

+44 個以上のバッジ

0 件のコメント

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 16

今までの合計 8,090