はじめに

Replace the rear case on your iPod shuffle for a shiny new clip.

パーツ

パーツは必要ありません。

  1. Widen the small gap between the front and rear case by inserting a metal spudger into the gap near the top of the iPod.
    • Widen the small gap between the front and rear case by inserting a metal spudger into the gap near the top of the iPod.

    • Be careful when using a metal spudger, as you may scratch the outer case.

    コメントを追加する

  2. Insert an iPod opening tool into the newly widened gap, and pry the rear case up and away from the front case.
    • Insert an iPod opening tool into the newly widened gap, and pry the rear case up and away from the front case.

    コメントを追加する

    • Insert the iPod Shuffle opening tool into the gap between the front and rear case on the same side, at the bottom corner of the iPod.

    • Pry the rear case away from the front case.

    コメントを追加する

    • Lift the bottom of the rear case and remove it from the rest of the iPod.

    コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Matthew Newsom

メンバー登録日: 2010年01月05日

31,876 ポイント

67のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 1

過去 7 日: 4

過去 30 日: 17

今までの合計 6,436