メインコンテンツにスキップ

iPod Shuffle 3rd Generation Logic Board Replacement

必要な工具と部品

  1. iPod Shuffle 3rd Generation Logic Board Replacement, Rear Case: 手順 1、 1の画像 1
    • Widen the small gap between the front and rear case by inserting a metal spudger into the gap near the top of the iPod.

    • Be careful when using a metal spudger, as you may scratch the outer case.

  2. iPod Shuffle 3rd Generation Logic Board Replacement: 手順 2、 2の画像 1 iPod Shuffle 3rd Generation Logic Board Replacement: 手順 2、 2の画像 2
    • Insert an iPod opening tool into the newly widened gap, and pry the rear case up and away from the front case.

  3. iPod Shuffle 3rd Generation Logic Board Replacement: 手順 3、 1の画像 1
    • Insert the iPod Shuffle opening tool into the gap between the front and rear case on the same side, at the bottom corner of the iPod.

    • Pry the rear case away from the front case.

  4. iPod Shuffle 3rd Generation Logic Board Replacement: 手順 4、 1の画像 1
    • Lift the bottom of the rear case and remove it from the rest of the iPod.

  5. iPod Shuffle 3rd Generation Logic Board Replacement, Logic Board: 手順 5、 1の画像 1
    • Disconnect the headphone jack and shuffle switch connector by prying it off the logic board with a spudger.

  6. iPod Shuffle 3rd Generation Logic Board Replacement: 手順 6、 1の画像 1
    • Remove the single Phillips screw securing the logic board to the front case.

  7. iPod Shuffle 3rd Generation Logic Board Replacement: 手順 7、 1の画像 1
    • Peel the battery up from the front case with an iPod opening tool.

    • Remove the logic board and battery from the iPod.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

作成者

4人の作成者と共同で作成されました。

Matthew Newsom

メンバー登録日: 01/05/10

39,452 ポイント

67のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 4

過去 30 日: 10

今までの合計 6,405