修理を始めるには コミュニティ ストア

iPod Shuffle 2nd Generation Logic Board Assembly Replacement

はじめに

Use this guide to remove your Shuffle's logic board assembly. The logic board assembly includes the logic board, headphone jack, and battery.

必要な工具と部品

  1. iPod Shuffle 2nd Generation Logic Board Assembly Replacement, Logic Board Assembly: 手順 1、 1の画像 1

    • Before beginning, be sure your Shuffle is turned off as shown.

    編集

  2. iPod Shuffle 2nd Generation Logic Board Assembly Replacement: 手順 2、 2の画像 1 iPod Shuffle 2nd Generation Logic Board Assembly Replacement: 手順 2、 2の画像 2

    • Use the edge of an iPod opening tool to pry the plastic cover off the headphone jack side of the Shuffle.

    • Remove the plastic cover and set it aside.

    編集

  3. iPod Shuffle 2nd Generation Logic Board Assembly Replacement: 手順 3、 1の画像 1

    • Remove the two Phillips screws from the headphone jack side of the Shuffle.

    編集

  4. iPod Shuffle 2nd Generation Logic Board Assembly Replacement: 手順 4、 2の画像 1 iPod Shuffle 2nd Generation Logic Board Assembly Replacement: 手順 4、 2の画像 2

    • Use the edge of an iPod opening tool to remove the steel cover from the headphone jack side of the Shuffle.

    編集

  6. iPod Shuffle 2nd Generation Logic Board Assembly Replacement: 手順 5、 2の画像 1 iPod Shuffle 2nd Generation Logic Board Assembly Replacement: 手順 5、 2の画像 2

    • Use the edge of an iPod opening tool to pry the plastic cover off the controls side of the Shuffle.

    • Remove the plastic cover and set it aside.

    編集

  7. iPod Shuffle 2nd Generation Logic Board Assembly Replacement: 手順 6、 2の画像 1 iPod Shuffle 2nd Generation Logic Board Assembly Replacement: 手順 6、 2の画像 2

    • Use a pair of tweezers to remove the hold and shuffle sliders from the Shuffle.

    編集

  8. iPod Shuffle 2nd Generation Logic Board Assembly Replacement: 手順 7、 1の画像 1

    • Remove the two Phillips screws on the controls side of the Shuffle.

    編集

  9. iPod Shuffle 2nd Generation Logic Board Assembly Replacement: 手順 8、 2の画像 1 iPod Shuffle 2nd Generation Logic Board Assembly Replacement: 手順 8、 2の画像 2

    • Use the edge of an iPod opening tool to remove the steel plate from the controls side of the Shuffle.

    編集

  10. iPod Shuffle 2nd Generation Logic Board Assembly Replacement: 手順 9、 1の画像 1

    • Use the edge of an iPod opening tool to slightly pry the steel plate on the headphone jack side of the Shuffle away from the lip cut into the outer case.

    編集

  11. iPod Shuffle 2nd Generation Logic Board Assembly Replacement: 手順 10、 2の画像 1 iPod Shuffle 2nd Generation Logic Board Assembly Replacement: 手順 10、 2の画像 2

    • Use your iPod opening tool to push the logic board assembly out of the outer case enough to grab the logic board by its edges.

    • Pull the logic board assembly out of the outer case.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

21 の人々がこのガイドを完成させました。

作成者

3人の作成者と共同で作成されました。

Andrew Bookholt

586,133 ポイント

619のガイドは作成済み

バッジ: 47

+44 個以上のバッジ

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 10

過去 30 日: 34

今までの合計 18,983