修理を始めるには コミュニティ ストア

iPod 2nd Generation Battery Replacement

はじめに

Battery not lasting long? Swap it out.

必要な工具と部品

  1. iPod 2nd Generation Battery Replacement, Rear Panel: 手順 1、 1の画像 1

    • Before opening your iPod, ensure that the hold switch is in the locked position.

    編集

  2. iPod 2nd Generation Battery Replacement: 手順 2、 1の画像 1

    • Opening the iPod can be challenging. Don't get discouraged if it takes a few tries before the iPod is opened.

    • Insert a plastic iPod opening tool in the seam between the white plastic front and metal back of the iPod. Once you've inserted the tool, run it along the seam to free the five tabs holding the iPod together.

    編集

  3. iPod 2nd Generation Battery Replacement: 手順 3、 1の画像 1

    • Continue to run the opening tool along the side of the case until all five tabs have been released.

    編集

  4. iPod 2nd Generation Battery Replacement: 手順 4、 1の画像 1

    • Work around the corner of the iPod and release the two tabs holding the iPod together near the dock connector.

    編集

  6. iPod 2nd Generation Battery Replacement: 手順 5、 1の画像 1

    • Free the five tabs holding the iPod together on the other side. You may be able to free the tabs by gently wiggling the front panel of the iPod.

    編集

  7. iPod 2nd Generation Battery Replacement: 手順 6、 1の画像 1

    • Lift the rear panel away from the iPod, making sure it doesn't catch on the headphone jack.

    編集

  8. iPod 2nd Generation Battery Replacement, Battery: 手順 7、 1の画像 1

    • Peel up the metallic tape attached to the top of the battery.

    編集

  9. iPod 2nd Generation Battery Replacement: 手順 8、 1の画像 1

    • Lift the battery up from the hard drive and lay it next the the iPod (it is still connected to the logic board).

    編集

  10. iPod 2nd Generation Battery Replacement: 手順 9、 1の画像 1

    • Lift up the end of the hard drive near the Firewire port to allow easy access to the battery connector.

    編集

  11. iPod 2nd Generation Battery Replacement: 手順 10、 1の画像 1

    • Carefully disconnect the white battery connector from the logic board. Be sure to pull only on the connector itself and not on the cables.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

18 の人々がこのガイドを完成させました。

作成者

1人の作成者と共同作成されました。

iRobot

メンバー登録日: 09/24/09

1 ポイント

636のガイドは作成済み

バッジ: 36

+33 個以上のバッジ

2 件のコメント

Nice easy fix. Modern batteries are twice the capacity too. These old gen iPods are great. Nice to have an apple product not made in China.

peter barker - 返信

For my 2nd Generation iPod A1019 I found the batteries linked to at the beginning of this tutorial to be too thick to close the iPod without considerable force that actually seemed to bend and distort the display. Side by side they are nearly twice the thickness of the original battery. I bought both the 2200 mAh version, then also the 1600 mAh version hoping it would be thinner. All these batteries are manufactured by Cameron Sino. I am hoping to be able to find the actual Sony item and my search continues.

Kupe - 返信

コメントを追加

統計データ:

過去 24時間: 4

過去 7 日: 29

過去 30 日: 174

今までの合計 28,562