iPhone 8 Back Glass Replacement

はじめに

This guide demonstrates a professional-level repair requiring advanced tools. With this special back glass separator, a broken iPhone 8/8P/X back glass can be removed in just 3 minutes. Residual glue can also be removed easily, which is convenient for subsequent attaching of a new back glass.

ビデオの概要

手順1 iPhone 8 Back Glass Replacement

iPhone 8 Back Glass Replacement, iPhone 8 Back Glass Replacement: 手順 1、 1の画像 1

Wire up the Back Glass Separator. Connect the Back Glass Separator with Air Compressor via an air pipe. Switch on the Air Compressor. Open the air compressor valve.
Switch on the Back Glass Separator. Rotate the pressure regulating valve and set the value as 0.4Mpa.

翻訳

手順2

Place iPhone 8 back glass assembly into the corresponding mold. Press ‘Up’. With the temperature rising to 240℃, press ‘Start’. The back glass assembly is clamped tightly by the mold.
After 200 seconds of heating, mandril of the machine starts to work.

翻訳

手順3

Remove the back glass after 18 seconds. Remove glue residue on the back glass thoroughly.
iPhone 8 back glass separating has been completed successfully.
Attach a new back glass to the midframe in the end.