メインコンテンツにスキップ

はじめに

Use this guide to remove or replace the Pentalobe screws.

  1. Before disassembling your iPhone, discharge the battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.
    • Before disassembling your iPhone, discharge the battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

    • Power off your iPhone before beginning disassembly.

    • Remove the two 3.6 mm-long P2 Pentalobe screws next to the Lightning connector.

終わりに

To reassemble your device, follow these instructions in reverse order.

98 の人々がこのガイドを完成させました。

Walter Galan

661,601 ポイント

1,203のガイドは作成済み

8 件のコメント

What size screwdriver do I need to remove these screws?

ronrola - 返信

P2 Pentalobe Screwdriver

sbrown9615 -

really? follow these steps in reverse to reinstall? it already is laughably short...

beautron7 - 返信

also how is this moderate difficulty?

beautron7 - 返信

I have the correct screwdriver, but after taking out the original pentalobe screws, they will not screw back into the iPhone. Really bizarre. Do these screws get easily stripped?

dcs Bu - 返信

コメントを追加

統計データを表示:

過去 24時間: 3

過去 7 日: 47

過去 30 日: 215

今までの合計 59,591