修理を始めるには コミュニティ ストア

iPhone 5s Front Facing Camera and Sensor Cable Assembly Replacement

必要条件のみ
この修理ガイドは、他のガイドの前提条件として使用されます。それ自体は不完全で、単独で使用されることはありません。

はじめに

Use this guide to replace the sensor cable containing the front-facing camera, microphone, ambient sensors, and the earpiece speaker contact pad, in your iPhone 5s.

必要な工具と部品

  1. iPhone 5s Front Facing Camera and Sensor Cable Assembly Replacement, Front Facing Camera and Sensor Cable Assembly: 手順 1、 1の画像 1
    この手順で使用する道具：
    iOpener
    $19.99
    購入する

    • This step requires removing the front facing camera and sensor cable from your front panel assembly.

    • The front facing camera and sensor cable is adhered to the display assembly with mild adhesive.

    • Using an iOpener to soften the adhesive will help safely remove it. Follow our iOpener instructions to use it.

    編集

  2. iPhone 5s Front Facing Camera and Sensor Cable Assembly Replacement: 手順 2、 2の画像 1 iPhone 5s Front Facing Camera and Sensor Cable Assembly Replacement: 手順 2、 2の画像 2

    • Using the edge of a set of tweezers or a metal spudger, gently pry the earpiece speaker contact cable up, to separate this portion of the camera and sensor cable from the adhesive below.

    • Only pry directly under the earpiece speaker contacts—there are sensors and microchips that can be damaged by prying elsewhere.

    編集

  4. iPhone 5s Front Facing Camera and Sensor Cable Assembly Replacement: 手順 3、 2の画像 1 iPhone 5s Front Facing Camera and Sensor Cable Assembly Replacement: 手順 3、 2の画像 2

    • Use the point of a spudger to lift the ambient light sensor and proximity sensor out of their recess in the display assembly.

    • There is a small, square plastic and metal holder for the proximity sensor. This holder is essential for the proximity sensor to function correctly.

    • If replacing the proximity sensor make sure that the holder remains adhered to the back of the display. If it comes off with the old proximity sensor, remove it from the old sensor and use a tiny bit of adhesive to re-attach it to the back of the display.

    編集

  5. iPhone 5s Front Facing Camera and Sensor Cable Assembly Replacement: 手順 4、 2の画像 1 iPhone 5s Front Facing Camera and Sensor Cable Assembly Replacement: 手順 4、 2の画像 2

    • Use the flat end of a spudger to gently peel the front-facing camera portion of the cable away from the display assembly.

    編集

  6. iPhone 5s Front Facing Camera and Sensor Cable Assembly Replacement: 手順 5、 3の画像 1 iPhone 5s Front Facing Camera and Sensor Cable Assembly Replacement: 手順 5、 3の画像 2 iPhone 5s Front Facing Camera and Sensor Cable Assembly Replacement: 手順 5、 3の画像 3

    • If you are reattaching the same shield plate to a new display, there is no need to peel the cable assembly off the LCD shield plate. Skip this step.

    • Carefully peel the cable assembly off of the LCD shield plate to remove it from the display.

    • Be careful not to grab the digitizer cable while peeling up the front facing camera and sensor assembly cable.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

9 の人々がこのガイドを完成させました。

作成者

8人の作成者と共同で作成されました。

Sam Goldheart

メンバー登録日: 10/18/12

465,647 ポイント

538のガイドは作成済み

バッジ: 48

+45 個以上のバッジ

チーム

iFixit iFixit人のメンバー

Staff

135 メンバー

16,732のガイドは作成済み

2 件のコメント

Be great if someone could put together some *reassembly* instructions for this. Particularly the section on the camera and sensors area.

Phil Thomas - 返信

It seems like a lot of steps have gone missing from this guide. The related guide (5SE) has much more explicit instructions for the same activity and should be used instead of this one. iPhone SE の正面カメラとセンサーケーブルの交換

Jeannie Crowley - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 6,308