iPhone 5 Lightning Connector and Speaker Assembly Replacement - iFixit 修理ガイド

はじめに

Internal prerequisite to remove the lightning connector and speaker assembly

必要な工具と部品

手順1 Lightning Connector and Speaker Assembly

iPhone 5 Lightning Connector and Speaker Assembly Replacement, Lightning Connector and Speaker Assembly: 手順 1、 1の画像 1

Remove the following screws securing the Lightning connector and speaker enclosure assembly to the rear case:
One 2.5 mm Phillips screw
Two 3.3 mm Phillips screws
One 2.9 mm Phillips screw
Two 1.5 mm Phillips screws
One 2.8 mm Phillips screw

手順2

iPhone 5 Lightning Connector and Speaker Assembly Replacement: 手順 2、 3の画像 1

iPhone 5 Lightning Connector and Speaker Assembly Replacement: 手順 2、 3の画像 2

iPhone 5 Lightning Connector and Speaker Assembly Replacement: 手順 2、 3の画像 3

Use the flat end of a spudger to gently pry the Lightning connector and speaker enclosure assembly cables up from the rear case.
Make sure you get the spudger under the large ribbon cable connected to the assembly. Prying the rest of the assembly away from the cable may result in a tear.

手順3

iPhone 5 Lightning Connector and Speaker Assembly Replacement: 手順 3、 3の画像 1

iPhone 5 Lightning Connector and Speaker Assembly Replacement: 手順 3、 3の画像 2

iPhone 5 Lightning Connector and Speaker Assembly Replacement: 手順 3、 3の画像 3

Remove the Lightning connector and speaker enclosure assembly from the rear case.
Take care not to lose the small metal washer on the speaker enclosure, or the four small metal washers beneath the Lightning connector screws.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

6人の作成者と共同で作成されました。

Andrew Optimus Goldheart

メンバー登録日: 10/17/09

502,807 ポイント

407のガイドは作成済み

+41 個以上のバッジ

チーム

iFixit iFixit人のメンバー

Staff

135 メンバー

16,767のガイドは作成済み

0 件のコメント

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 1,807