メインコンテンツにスキップ

iPhone 4S Upper Antenna Replacement

必要条件のみ
この修理ガイドは、他のガイドの前提条件として使用されます。それ自体は不完全で、単独で使用されることはありません。

必要な工具と部品

  1. iPhone 4S Upper Antenna Replacement, Upper Antenna: 手順 1、 1の画像 1
    • Remove the 2.4 mm Phillips screw next to the headphone jack.

  2. iPhone 4S Upper Antenna Replacement: 手順 2、 2の画像 1 iPhone 4S Upper Antenna Replacement: 手順 2、 2の画像 2
    • Use the edge of a plastic opening tool to peel the upper antenna off the headphone jack.

    • Use a pair of tweezers to remove the upper antenna from the iPhone.

    • Before reassembly, be sure to clean the metal-to-metal contact point on the upper antenna (not the mating halves of its connector) with a de-greaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to cause wireless interference issues.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

1人の作成者と共同作成されました。

Walter Galan

694,561 ポイント

1,203のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 506