メインコンテンツにスキップ

この翻訳は、ソースガイドの最新の更新を反映していない可能性があります。 翻訳の更新に協力してください。 または ソースガイドを参照してください

iPhone 3GのSIMカードの交換

必要な工具と部品

  1. この手順は未翻訳です。 翻訳を手伝う。

    iPhone 3GのSIMカードの交換, SIMカード: 手順 1、 2の画像 1 iPhone 3GのSIMカードの交換, SIMカード: 手順 1、 2の画像 2
    • Apple includes a "SIM eject tool" with the iPhone 3G. If you don't have this tool, don't worry, an ordinary paperclip works just as well.

    • Insert your SIM eject tool or a paper clip into the hole next to the headphone jack.

    • Press down on the tool until the SIM card tray pops out.

  2. iPhone 3GのSIMカードの交換: 手順 2、 1の画像 1
    • SIMカードトレイからSIMカードを取り出します。

    • 正しい装着方向にSIMカードを取り付けるには、切り込みの入った角が目印になります。

    The the sim has slipped and the eject spring (using the iphone tool) is not ejecting the sim,

    I think I need a tool to open the case - which one?

    I may need another spring - do iFixit sell them?

    Can anyone help me? DitsyLady

    Janette - 返信

    Hi, I followed these instructions and my sim came out easily but now I can’t get the tray back into my phone. I have tried turning the screw both ways with my paper clip but nothing works. Help!

    LINDA - 返信

    sehr einfach und schnell..danke

    HEINZ JIMMY - 返信

    for re-inserting the SIM card tray it's good to know that the side of the SIM card with the metal contacts should face DOWN (towards the back of the iPhone)

    Diemo Schwarz - 返信

終わりに

デバイスを再度組み立てるには、この説明書の逆の順番で組み立ててください。

97 の人々がこのガイドを完成させました。

以下の翻訳者の皆さんにお礼を申し上げます:

en jp

83%

これらの翻訳者の方々は世界を修理する私たちのサポートをしてくれています。 あなたも貢献してみませんか?
翻訳を始める ›

作成者

7人の作成者と共同で作成されました。

iRobot

メンバー登録日: 09/24/09

1 ポイント

636のガイドは作成済み

コメント 1 件

I have tried to install 2 x different sim cards but still the phone shows NO SIM????

Jaqueline Maddane Smith - 返信

コメントを追加

統計データ:

過去 24時間: 1

過去 7 日: 4

過去 30 日: 22

今までの合計 181,176