メインコンテンツにスキップ

iPhone 3G SIM Card Replacement

必要な工具と部品

  1. iPhone 3G SIM Card Replacement, SIM Card: 手順 1、 2の画像 1 iPhone 3G SIM Card Replacement, SIM Card: 手順 1、 2の画像 2
    • Apple includes a "SIM eject tool" with the iPhone 3G. If you don't have this tool, don't worry, an ordinary paperclip works just as well.

    • Insert your SIM eject tool or a paper clip into the hole next to the headphone jack.

    • Press down on the tool until the SIM card tray pops out.

  2. iPhone 3G SIM Card Replacement: 手順 2、 1の画像 1
    • Remove the SIM card from the SIM card tray.

    • The cut-off corner should make it easy to reinstall the SIM card in the correct orientation.

    The the sim has slipped and the eject spring (using the iphone tool) is not ejecting the sim,

    I think I need a tool to open the case - which one?

    I may need another spring - do iFixit sell them?

    Can anyone help me? DitsyLady

    Janette - 返信

    Hi, I followed these instructions and my sim came out easily but now I can’t get the tray back into my phone. I have tried turning the screw both ways with my paper clip but nothing works. Help!

    LINDA - 返信

    sehr einfach und schnell..danke

    HEINZ JIMMY - 返信

    for re-inserting the SIM card tray it's good to know that the side of the SIM card with the metal contacts should face DOWN (towards the back of the iPhone)

    Diemo Schwarz - 返信

終わりに

To reassemble your device, follow these instructions in reverse order.

97 の人々がこのガイドを完成させました。

作成者

7人の作成者と共同で作成されました。

iRobot

メンバー登録日: 09/24/09

1 ポイント

636のガイドは作成済み

コメント 1 件

I have tried to install 2 x different sim cards but still the phone shows NO SIM????

Jaqueline Maddane Smith - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 5

過去 30 日: 36

今までの合計 181,154