メインコンテンツにスキップ

はじめに

How to remove the SIM card from the 1st Generation iPhone.

  1. Insert a SIM card eject tool or paper clip into the hole next to the headphone jack.
    • Insert a SIM card eject tool or paper clip into the hole next to the headphone jack.

    • Press down on the paper clip until the SIM card tray pops out.

  2. Grasp the SIM card tray and slide it out of the iPhone.
    • Grasp the SIM card tray and slide it out of the iPhone.

終わりに

To reassemble your device, follow these instructions in reverse order.

40 の人々がこのガイドを完成させました。

iRobot

メンバー登録日: 2009年09月24日

1 ポイント

648のガイドは作成済み

5 件のコメント

thats what i did too. but it froze..

i dont know what to do..

Marie - 返信

Can't access

hope -

Try with a little strap cut out from a radiology exam sheet. Put it inside the sim tray and try to open again. It works.

Henri Salvat - 返信

Does anyone know where I can get a SIM tray and card for the 1st get iPhone model A1203?

TIA

J R Rosen - 返信

Did you ever find an answer for this? I was given a 1st gen iPhone A1203 and it doesn't have a sim card. Thanks.

Alex Omar - 返信

コメントを追加

統計データを表示:

過去 24時間: 9

過去 7 日: 34

過去 30 日: 127

今までの合計 79,060