メインコンテンツにスキップ

iPad Pro 9.7" Display Assembly Disconnect

必要条件のみ
この修理ガイドは、他のガイドの前提条件として使用されます。それ自体は不完全で、単独で使用されることはありません。

必要な工具と部品

  1. iPad Pro 9.7" Display Assembly Disconnect, Remove the display bracket screws: 手順 1、 1の画像 1
    • Use a Phillips screwdriver to remove the three 1.3 mm Phillips screws securing the display cable bracket.

  2. iPad Pro 9.7" Display Assembly Disconnect, Remove the bracket: 手順 2、 2の画像 1 iPad Pro 9.7" Display Assembly Disconnect, Remove the bracket: 手順 2、 2の画像 2
    • Remove the display cable bracket.

  3. iPad Pro 9.7" Display Assembly Disconnect, Disconnect the display assembly: 手順 3、 2の画像 1 iPad Pro 9.7" Display Assembly Disconnect, Disconnect the display assembly: 手順 3、 2の画像 2
    • Use the flat end of the spudger to disconnect the display assembly connector from the motherboard socket.

  4. iPad Pro 9.7" Display Assembly Disconnect: 手順 4、 2の画像 1 iPad Pro 9.7" Display Assembly Disconnect: 手順 4、 2の画像 2
    • Repeat the previous step for the two remaining connectors.

  5. iPad Pro 9.7" Display Assembly Disconnect, Remove the display assembly: 手順 5、 2の画像 1 iPad Pro 9.7" Display Assembly Disconnect, Remove the display assembly: 手順 5、 2の画像 2
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

6人の作成者と共同で作成されました。

Arthur Shi

メンバー登録日: 01/03/18

247,909 ポイント

503のガイドは作成済み

チーム

iFixit iFixit人のメンバー

Staff

135 メンバー

16,476のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 110