メインコンテンツにスキップ

はじめに

Prereq for removing logic board with no battery.

パーツ

パーツは指定されていません。

  1. Use the tip of a spudger to start peeling up the right side of the black tape covering the small metal bracket. Use tweezers to peel the tape up the rest of the way, and remove it from the bracket. Use tweezers to peel the tape up the rest of the way, and remove it from the bracket.
    • Use the tip of a spudger to start peeling up the right side of the black tape covering the small metal bracket.

    • Use tweezers to peel the tape up the rest of the way, and remove it from the bracket.

  2. Use a plastic opening tool to push the bracket slightly to the left. Use a plastic opening tool to push the bracket slightly to the left.
    • Use a plastic opening tool to push the bracket slightly to the left.

  3. Android 修理キット

    交換用スクリーンやバッテリーの修理キット

    ショップを見る

    Android 修理キット

    交換用スクリーンやバッテリーの修理キット

    ショップを見る
  4. Use a spudger tip to lift up the lower side of the bracket. Use a spudger tip to lift up the lower side of the bracket.
    • Use a spudger tip to lift up the lower side of the bracket.

  5. Remove the bracket with tweezers. During reassembly, hook the top edge of the plate in place first, then lower the bottom into its slots.
    • Remove the bracket with tweezers.

    • During reassembly, hook the top edge of the plate in place first, then lower the bottom into its slots.

まとめ

To reassemble your device, follow these instructions in reverse order.

Walter Galan

609,757 ポイント

1,203のガイドは作成済み

0 件のコメント

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 86