メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

Prereq for disconnecting battery.

パーツ

パーツは指定されていません。

  1. Remove the three 1.3 mm Phillips #00 screws securing the connector shield to the logic board.
    • Remove the three 1.3 mm Phillips #00 screws securing the connector shield to the logic board.

    • Be sure to not substitute these three screws with any other screws, specifically the screws securing the LCD shield plate to the rear case of the iPad. Any slightly longer screws may strip the screw holes and result in irreparable damage to the logic board.

  2. Use a pair of tweezers to grasp and remove the connector shield from the iPad.
    • Use a pair of tweezers to grasp and remove the connector shield from the iPad.

  3. Use a plastic opening tool to gently pry the battery connector up from its socket on the logic board. Be very careful to only pry up on the battery connector and not on the socket itself. If you pry up on the logic board socket, you may break the connector entirely.
    • Use a plastic opening tool to gently pry the battery connector up from its socket on the logic board.

    • Be very careful to only pry up on the battery connector and not on the socket itself. If you pry up on the logic board socket, you may break the connector entirely.

終わりに

To reassemble your device, follow these instructions in reverse order.

Andrew Optimus Goldheart

メンバー登録日: 2009年10月17日

459,052 ポイント

410のガイドは作成済み

チーム

iFixit iFixit人のメンバー

Community

132 メンバー

13,037のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 1

過去 7 日: 5

過去 30 日: 10

今までの合計 378