iON SnapCam 1046 Lite Camera Micro USB Replacement - iFixit 修理ガイド

必要な工具と部品

手順1 Camera Lens and Cover

iON SnapCam 1046 Lite Camera Micro USB Replacement, Camera Lens and Cover: 手順 1、 2の画像 1

iON SnapCam 1046 Lite Camera Micro USB Replacement, Camera Lens and Cover: 手順 1、 2の画像 2

Remove any external skins placed on the device. To do so, simply lift up and peel to remove.

手順2

iON SnapCam 1046 Lite Camera Micro USB Replacement: 手順 2、 1の画像 1

Firmly pull on the back clip in order to remove.

手順3

iON SnapCam 1046 Lite Camera Micro USB Replacement: 手順 3、 1の画像 1

Use a Phillips head screwdriver to remove the four 4mm PH00 screws located on the sides of the device. All screws are located under each of the grey covers for the microSD card and the microUSB insert.

手順4

iON SnapCam 1046 Lite Camera Micro USB Replacement: 手順 4、 3の画像 1

iON SnapCam 1046 Lite Camera Micro USB Replacement: 手順 4、 3の画像 2

iON SnapCam 1046 Lite Camera Micro USB Replacement: 手順 4、 3の画像 3

Grab a metal or plastic opening tool and insert it into the middle slot on the bottom of the camera and lightly pry open.
Locate the camera lens in the bottom left-hand corner of the picture which can be replaced by replacing the entire cover. The back of the cover is also shown. The camera is now located in the top right-hand corner of the picture.

手順5 Micro USB

iON SnapCam 1046 Lite Camera Micro USB Replacement, Micro USB: 手順 5、 1の画像 1

Using the nylon spudger, pop up the edges of the motherboard.

手順6

iON SnapCam 1046 Lite Camera Micro USB Replacement: 手順 6、 1の画像 1

With the Micro USB port exposed, part can be replaced with advanced soldering and circuitry.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

2人の作成者と共同で作成されました。

Baleigh Hance

メンバー登録日: 11/20/17

101 ポイント

1ガイドが承認済み

チーム

IUPUI, Team S22-G4, Bayer Fall 2017 IUPUI, Team S22-G4, Bayer Fall 2017人のメンバー

IUPUI-BAYER-F17S22G4

5 メンバー

4のガイドは作成済み

0 件のコメント

統計データ:

過去 24時間: 1

過去 7 日: 1

過去 30 日: 6

今までの合計 150