はじめに

Remove the access door to replace RAM modules.

パーツ

パーツは必要ありません。

  1. Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.
    • Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.

    • These screws will remain captive in the access door.

    • Remove the access door from your iMac.

    • During reassembly, fasten the access door loosely and align it with the pocket cut into the outer case of the iMac before fully tightening the screws.

まとめ

To reassemble your device, follow these instructions in reverse order.

29 の人々がこのガイドを完成させました。

Andrew Bookholt

505,757 ポイント

618のガイドは作成済み

統計データを表示:

過去 24時間: 4

過去 7 日: 18

過去 30 日: 52

今までの合計 44,627