メインコンテンツにスキップ

はじめに

Internal Prerequisite.

  1. Disconnect the SATA data and power cables by pulling their connectors away from the hard drive. Disconnect the SATA data and power cables by pulling their connectors away from the hard drive.
    • Disconnect the SATA data and power cables by pulling their connectors away from the hard drive.

  2. Disconnect the hard drive thermal sensor cable from the thermal sensor attached to the side of the hard drive.
    • Disconnect the hard drive thermal sensor cable from the thermal sensor attached to the side of the hard drive.

  3. Compress the plastic hard drive retainer by pushing it toward the bottom edge of the iMac. Pull the top edge of the hard drive slightly away from the rear case.
    • Compress the plastic hard drive retainer by pushing it toward the bottom edge of the iMac.

    • Pull the top edge of the hard drive slightly away from the rear case.

  4. Lift the hard drive off its bottom retaining posts and remove it from the iMac.
    • Lift the hard drive off its bottom retaining posts and remove it from the iMac.

終わりに

To reassemble your device, follow these instructions in reverse order.

Andrew Bookholt

526,824 ポイント

618のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 2

今までの合計 254