メインコンテンツにスキップ

iMac Intel 21.5" EMC 2428 GPU Assembly Replacement

必要条件のみ
この修理ガイドは、他のガイドの前提条件として使用されます。それ自体は不完全で、単独で使用されることはありません。

必要な工具と部品

  1. iMac Intel 21.5" EMC 2428 GPU Assembly Replacement, GPU Assembly: 手順 1、 1の画像 1
    • Remove the strip of tape securing the GPU thermal sensor cable to the logic board.

  2. iMac Intel 21.5" EMC 2428 GPU Assembly Replacement: 手順 2、 1の画像 1
    • Remove the following three screws:

    • One 4.2 mm T10 Torx screw

    • Two 5 mm T8 Torx screws

  3. iMac Intel 21.5" EMC 2428 GPU Assembly Replacement: 手順 3、 1の画像 1
    • Grab the GPU thermal sensor cable connector and pull it straight up and out of its socket on the logic board.

    • Do not pull the connector out by its cables.

  4. iMac Intel 21.5" EMC 2428 GPU Assembly Replacement: 手順 4、 1の画像 1
    • Lift the GPU heat sink slightly and pull the GPU board out of its socket on the logic board.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Andrew Bookholt

585,714 ポイント

619のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 197