はじめに

Use this guide to replace or upgrade your RAM chips.

  1. Lay your iMac front side down on a table with the lower edge facing yourself.
    • Lay your iMac front side down on a table with the lower edge facing yourself.

    • Loosen the single Phillips screw in the center of the access door.

    • This screw is captive in the access door.

    • Remove the access door from your iMac.

  2. Pro Tech ツールキットを含むご注文、もしくは総額 $100ドル以上のご注文については送料無料です。

    当社のショップを閲覧する
  3. Use the sharp end of a spudger to pull the black plastic RAM tabs out of the memory bay. Pull the black plastic RAM tab away from your iMac to eject the RAM chip.
    • Use the sharp end of a spudger to pull the black plastic RAM tabs out of the memory bay.

    • Pull the black plastic RAM tab away from your iMac to eject the RAM chip.

  4. Grab the RAM chip by its edges and pull it straight out of its slot.
    • Grab the RAM chip by its edges and pull it straight out of its slot.

    • If two RAM chips are installed, repeat this process for the other chip.

まとめ

To reassemble your device, follow these instructions in reverse order.

84 の人々がこのガイドを完成させました。

Walter Galan

589,058 ポイント

1,203のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 2

過去 7 日: 12

過去 30 日: 68

今までの合計 34,155