はじめに

Remove your access door to replace RAM chips or to open the case of your iMac.

パーツ

パーツは必要ありません。

Lay your iMac front side down on a table with the lower edge facing yourself.
  • Lay your iMac front side down on a table with the lower edge facing yourself.

  • Loosen the single Phillips screw in the center of the access door.

  • This screw is captive in the access door.

  • Remove the access door from your iMac.

The grid won't fall off by itself. You'll have to help it. Use the smallest screwdriver you have; the Torx 6 worked fine for me. It should enter in one of the many holes composing the grid. Use it as a lever to ploy the grid a little bit. You may catch it with your fingers and that's it.

Be carefull not to damage the hole by a too strong leverage.

Laurent - 返信

much more safer to use duct tape, instead of torx 6. (glue it along the length of the grid and pull). it will loose instantly and smooth;)

Hofmann78rus - 返信

Anyone know a guide to replace the plastic piece this screw connects to? I accidentally forgot this step - went to remove the front bezel and bent the plastic piece the access door connects to.

Jason Augustin - 返信

まとめ

To reassemble your device, follow these instructions in reverse order.

10 の人々がこのガイドを完成させました。

Walter Galan

556,824 ポイント

2,886のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 4

過去 30 日: 13

今までの合計 11,857