メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

If your iMac G4 17 800 MHz EMC 1936 is in need of a RAM upgrade or it has failed in some way, follow this guide to replace the RAM.

Be sure to turn off your computer and unplug it prior to beginning your repair.

  1. Unplug all the cables from the computer, including the power cable. Lay the computer face-down, supporting the neck and base with a soft cloth under the screen.
    • Unplug all the cables from the computer, including the power cable. Lay the computer face-down, supporting the neck and base with a soft cloth under the screen.

  2. Loosen the four Phillips #0 screws.
    • Loosen the four Phillips #0 screws.

  3. Carefully remove the base access panel.
    • Carefully remove the base access panel.

  4. Remove the RAM from the slot. Remove the RAM from the slot.
    • Remove the RAM from the slot.

終わりに

To reassemble your device, follow these instructions in reverse order.

13 の人々がこのガイドを完成させました。

David Hunter

メンバー登録日: 2011年10月05日

593 ポイント

4のガイドは作成済み

チーム

Cal Poly, Team 21-22, Maness Fall 2011 Cal Poly, Team 21-22, Maness Fall 2011人のメンバー

CPSU-MANESS-F11S21G22

4 メンバー

13のガイドは作成済み

コメント1件

We need to show the RAM being taken off

David Hunter - 返信

コメントを追加

統計データを表示:

過去 24時間: 2

過去 7 日: 5

過去 30 日: 26

今までの合計 4,549