メインコンテンツにスキップ

iMac G4 17 800 MHz EMC 1936 Bottom Plate Housing Replacement

必要な工具と部品

  1. iMac G4 17 800 MHz EMC 1936 Bottom Plate Housing Replacement, Bottom Plate: 手順 1、 1の画像 1
    • Unplug all the cables from the computer, including the power cable. Lay the computer face-down, supporting the neck and base with a soft cloth under the screen.

  2. iMac G4 17 800 MHz EMC 1936 Bottom Plate Housing Replacement: 手順 2、 1の画像 1
    • Loosen the four Phillips #0 screws.

  3. iMac G4 17 800 MHz EMC 1936 Bottom Plate Housing Replacement: 手順 3、 1の画像 1
    • Carefully remove the base access panel.

  4. iMac G4 17 800 MHz EMC 1936 Bottom Plate Housing Replacement, Bottom Plate Housing: 手順 4、 2の画像 1 iMac G4 17 800 MHz EMC 1936 Bottom Plate Housing Replacement, Bottom Plate Housing: 手順 4、 2の画像 2
    • Remove the four 25mm T-15 screws.

  5. iMac G4 17 800 MHz EMC 1936 Bottom Plate Housing Replacement: 手順 5、 2の画像 1 iMac G4 17 800 MHz EMC 1936 Bottom Plate Housing Replacement: 手順 5、 2の画像 2
    • Open the housing plate.

    • Be gentle with the wires still connected to the logic board so as not to ruin the cables.

    • A fixed plug connector between the logic board and upper unit will cause some resistance. Pull gently but firmly.

終わりに

To reassemble your device, follow these instructions in reverse order.

6 の人々がこのガイドを完成させました。

作成者

7人の作成者と共同で作成されました。

Justin

メンバー登録日: 10/05/11

303 ポイント

3のガイドは作成済み

チーム

Cal Poly, Team 21-22, Maness Fall 2011 Cal Poly, Team 21-22, Maness Fall 2011人のメンバー

CPSU-MANESS-F11S21G22

4 メンバー

13のガイドは作成済み

コメント 1 件

If you do this - don't you still need to apply a fresh coat of thermal paste to the exposed ends of the two heat-sink posts (that separate when you open a G4 flatpanel this far) - my understanding was that the machine would overheat and you'd be left with didley squat!!

Gregg :O)

amicuset - 返信

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 4

今までの合計 2,141