修理を始めるには コミュニティ ストア

このバージョンは誤った内容を含んでいる可能性があります。最新の承認済みスナップショットに切り替えてください。

作成者： Sachin Shenoi (そして 4 人のその他投稿者)
  • コメント: 4
  • お気に入り: 0
  • 完了: 3

難易度

簡単

手順

7

所要時間

5 - 15 分

セクション

2

  • 3手順
  • 4手順

フラグ

0

ツール

パーツ

パーツは指定されていません。

  1. この手順は未翻訳です。 翻訳を手伝う。

    Orient the iHome upside down with the speakers facing away from you.

    • Orient the iHome upside down with the speakers facing away from you.

    翻訳

  2. この手順は未翻訳です。 翻訳を手伝う。

    Remove the four 9.5 mm Phillips #2 screws located on each of the four corners of the iHome's back cover. Remove the four 9.5 mm Phillips #2 screws located on each of the four corners of the iHome's back cover.

    • Remove the four 9.5 mm Phillips #2 screws located on each of the four corners of the iHome's back cover.

    翻訳

  3. この手順は未翻訳です。 翻訳を手伝う。

    Remove the back cover by grabbing its sides and lifting it off the iHome.

    • Remove the back cover by grabbing its sides and lifting it off the iHome.

    翻訳

  5. この手順は未翻訳です。 翻訳を手伝う。

    Disconnect all five wire bundles attached to the motherboard by pulling them away from their connection. The order in which the wire bundles are removed does not matter.

    • Disconnect all five wire bundles attached to the motherboard by pulling them away from their connection.

    • The order in which the wire bundles are removed does not matter.

    • You may need to remove some black foam tape in order fully disconnect some of the wires.

    翻訳

  6. この手順は未翻訳です。 翻訳を手伝う。

    Unscrew the four 9.5 mm Phillips #2 screws on the four metal brackets located at each corner of the motherboard. Unscrew the four 9.5 mm Phillips #2 screws on the four metal brackets located at each corner of the motherboard.

    • Unscrew the four 9.5 mm Phillips #2 screws on the four metal brackets located at each corner of the motherboard.

    翻訳

  7. この手順は未翻訳です。 翻訳を手伝う。

    Unscrew the grey 6.0 mm Phillips #1 screw directly above the red, blue, and green component ports. Unscrew the grey 6.0 mm Phillips #1 screw directly above the red, blue, and green component ports.

    • Unscrew the grey 6.0 mm Phillips #1 screw directly above the red, blue, and green component ports.

    翻訳

  8. この手順は未翻訳です。 翻訳を手伝う。

    Remove the motherboard from its housing by grabbing it near its edges and carefully pulling it upward. Remove the motherboard from its housing by grabbing it near its edges and carefully pulling it upward. Remove the motherboard from its housing by grabbing it near its edges and carefully pulling it upward.

    • Remove the motherboard from its housing by grabbing it near its edges and carefully pulling it upward.

    翻訳
ゴール

3 の人々がこのガイドを完成させました。

作成者

4他の投稿者と一緒に

Sachin Shenoi

メンバー登録日: 2016年10月10日

333 ポイント

2のガイドは作成済み

バッジ: 9

+6 個以上のバッジ

チーム

Cal Poly, Team 20-1, Livingston Fall 2016 Cal Poly, Team 20-1, Livingston Fall 2016人のメンバー

CPSU-LIVINGSTON-F16S20G1

4 メンバー

7のガイドは作成済み

4 件のコメント

Easy to do,

but where can i buy a new motherboard ?

reagrds

Joerg (ifixit@xyz.logopainter.de)

Joerg Peters - 返信

I have the same problem ? Where I can obtain a new motherboard ?

Stefano Antoniutti

anto5657@alice.it

Stefano Antoniutti - 返信

Were you able to buy the motherboard?

Rodrigo -

I have the same problem ? Where I can obtain a new motherboard ?

Rodrigo

rodrigo@r7criacoes.com.br

Rodrigo - 返信

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 10

今までの合計 1,428