メインコンテンツにスキップ

iHome iAVS16 Power Board Replacement

必要な工具と部品

  1. iHome iAVS16 Power Board Replacement, Power Board: 手順 1、 3の画像 1 iHome iAVS16 Power Board Replacement, Power Board: 手順 1、 3の画像 2 iHome iAVS16 Power Board Replacement, Power Board: 手順 1、 3の画像 3
    • Remove the four 1.7 mm Phillips #0 screws located on the bottom of the device.

    • Lift up the bottom of the device.

    • Carefully lift the bottom of the device up as to not damage the ribbon cable connecting it.

  2. iHome iAVS16 Power Board Replacement: 手順 2、 3の画像 1 iHome iAVS16 Power Board Replacement: 手順 2、 3の画像 2 iHome iAVS16 Power Board Replacement: 手順 2、 3の画像 3
    • Remove the two 1.7 mm Phillips #0 screws holding the white face place onto the inside of the device's bottom.

    • Using an iFixit opening tool on the side without the black adhesive, carefully lift up the white face plate.

    • Lifting too quickly could damage the ribbon cable still attached.

  3. iHome iAVS16 Power Board Replacement: 手順 3、 2の画像 1 iHome iAVS16 Power Board Replacement: 手順 3、 2の画像 2
    • Using the tweezers, lift up on the black tab holding the ribbon cable down.

    • Carefully pull the ribbon cable back and out of the slot.

  4. iHome iAVS16 Power Board Replacement: 手順 4、 3の画像 1 iHome iAVS16 Power Board Replacement: 手順 4、 3の画像 2 iHome iAVS16 Power Board Replacement: 手順 4、 3の画像 3
    • Remove the two 1.7 mm Phillips #0 screws holding the power board in.

    • Carefully flip the board over.

    • Remove the red connector from its socket with a pair of tweezers.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

4人の作成者と共同で作成されました。

Ashley Famularo

メンバー登録日: 10/25/19

181 ポイント

2のガイドは作成済み

チーム

UMass Dartmouth, Team S1-G7, O'Connell Fall 2019 UMass Dartmouth, Team S1-G7, O'Connell Fall 2019人のメンバー

UMASSD-O'CONNELL-F19S1G7

4 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 107