修理を始めるには コミュニティ ストア

iHome IBT16 Auxiliary Port Replacement

はじめに

Use this guide to replace the auxiliary port on the iHome iBT16.

必要な工具と部品

  1. iHome IBT16 Auxiliary Port Replacement, Base Plate: 手順 1、 2の画像 1 iHome IBT16 Auxiliary Port Replacement, Base Plate: 手順 1、 2の画像 2

    • Make sure to flip the device over to get into the correct orientation

    • Using the Philips #00 Screwdriver, unscrew and remove the four 9mm black screws on the base plate of the device.

    • Make sure to keep these screws in a safe location so you don't lose them

    編集

  2. iHome IBT16 Auxiliary Port Replacement: 手順 2、 2の画像 1 iHome IBT16 Auxiliary Port Replacement: 手順 2、 2の画像 2

    • Using the plastic opening tool, insert into the crack between the base plate and the main body of the device

    • Using a lever like motion, push the opening tool down thus lifting the plate

    • You will need to use your fingers to lift the base plate off the main body of the device

    • The motherboard is directly underneath the base plate

    編集

  4. iHome IBT16 Auxiliary Port Replacement, Auxiliary Port: 手順 3、 2の画像 1 iHome IBT16 Auxiliary Port Replacement, Auxiliary Port: 手順 3、 2の画像 2

    • Using the Philips #00 screwdriver, unscrew and remove the two silver 10mm screws holding the motherboard

    • Don't misplace the screws! Keep them in a safe place while working on the device

    • Make sure to ground yourself prior to continuing at this point

    編集

  5. iHome IBT16 Auxiliary Port Replacement: 手順 4、 1の画像 1

    • Using the plastic opening tool, pull the motherboard out of the casing

    • Make sure to lift it out at an angle to the back, as the plastic power switch is attached to the board and can be broken

    編集

  6. iHome IBT16 Auxiliary Port Replacement: 手順 5、 2の画像 1 iHome IBT16 Auxiliary Port Replacement: 手順 5、 2の画像 2

    • Desolder the 5 points holding the auxiliary port to the motherboard

    • Once complete, it's as simple as lifting the port from the board

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

2人の作成者と共同で作成されました。

Ryan Edwards

メンバー登録日: 03/21/17

331 ポイント

3のガイドは作成済み

バッジ: 8

+5 個以上のバッジ

チーム

UMass Dartmouth, Team S3-G6, Botvin Spring 2017 UMass Dartmouth, Team S3-G6, Botvin Spring 2017人のメンバー

UMASSD-BOTVIN-S17S3G6

2 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 3

過去 7 日: 3

過去 30 日: 3

今までの合計 541