メインコンテンツにスキップ

はじめに

Install an Airport Extreme 802.11g card internally.

  1. Use a coin to rotate the battery locking screw 90 degrees clockwise.
    • Use a coin to rotate the battery locking screw 90 degrees clockwise.

  2. Lift the battery out of the computer.
    • Lift the battery out of the computer.

  3. iPhoneのバッテリーキット

    Only $29.99

    Buy Now

    iPhoneのバッテリーキット

    Only $29.99

    Buy Now
  4. Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.
    • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

    • If the keyboard does not come free, use a small flathead screwdriver to turn the keyboard locking screw 180 degrees in either direction and try again.

    • Flip the keyboard over, away from the screen, and rest it face-down on the trackpad area.

  5. Push the wire clasp away from the AirPort card and toward the display, then rotate up to free it from the RAM shield.
    • Push the wire clasp away from the AirPort card and toward the display, then rotate up to free it from the RAM shield.

  6. Grasp the clear plastic tab on the AirPort card and pull toward the display.
    • Grasp the clear plastic tab on the AirPort card and pull toward the display.

  7. Hold the Airport card in one hand and use your other hand to remove the antenna cable.
    • Hold the Airport card in one hand and use your other hand to remove the antenna cable.

まとめ

To reassemble your device, follow these instructions in reverse order.

18 の人々がこのガイドを完成させました。

添付文書

iRobot

メンバー登録日: 2009年09月24日

1 ポイント

624のガイドは作成済み

コメント1件

my ibook G4 doesnt have spot for air card to get pluged in it just a RAM im confused how to get internet . please hep fix it

kasey beebe - 返信

コメントを追加する

統計データを表示:

過去 24時間: 1

過去 7 日: 4

過去 30 日: 7

今までの合計 16,629