メインコンテンツにスキップ

はじめに

Replacing the bezel covering the Lcd

パーツ

パーツは指定されていません。

  1. Use a coin to unscrew the battery cover, and remove battery.
    • Use a coin to unscrew the battery cover, and remove battery.

  2. Use a t8 Torx driver to unscrew the two screws holding in the back cover, then remove the cover. Use a t8 Torx driver to unscrew the two screws holding in the back cover, then remove the cover.
    • Use a t8 Torx driver to unscrew the two screws holding in the back cover, then remove the cover.

  3. Open the screen, and remove the two t8 Torx screws holding the bezel in place.
    • Open the screen, and remove the two t8 Torx screws holding the bezel in place.

  4. Use a flat tip screw driver to unsnap the bezel from its place. When at the top rubberized area, pry the bezel down.
    • Use a flat tip screw driver to unsnap the bezel from its place.

    • When at the top rubberized area, pry the bezel down.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

aidan

メンバー登録日: 2016年02月26日

101 ポイント

1ガイドが承認済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 1

過去 7 日: 5

過去 30 日: 46

今までの合計 1,707