メインコンテンツにスキップ

iBook G3 14" Rear Display Bezel Replacement

必要条件のみ
この修理ガイドは、他のガイドの前提条件として使用されます。それ自体は不完全で、単独で使用されることはありません。

必要な工具と部品

  1. iBook G3 14" Rear Display Bezel Replacement, Rear Display Bezel: 手順 1、 1の画像 1
    • Use a 1.5 mm hex screwdriver to remove the two hex screws on either side of the display (four screws total).

    • If you don't have a 1.5 mm hex driver, you can probably get these screws out with a T6 Torx screwdriver. However, if you use a T6 Torx driver you'll be more likely to strip the screws.

  2. iBook G3 14" Rear Display Bezel Replacement: 手順 2、 1の画像 1
    • Use your thumbs to slightly separate the rear bezel from the front bezel.

    • It is helpful to hold the opposing corner of the display stationary to aid in flexing the rear bezel away from the display.

  3. iBook G3 14" Rear Display Bezel Replacement: 手順 3、 3の画像 1 iBook G3 14" Rear Display Bezel Replacement: 手順 3、 3の画像 2 iBook G3 14" Rear Display Bezel Replacement: 手順 3、 3の画像 3
    • Insert the flat end of a spudger into the gap between the front and rear bezels.

    • Rotate your spudger until it is parallel to the front face of the display.

    • Run the spudger around the perimeter of the display to separate the rear bezel from its retaining clips.

  4. iBook G3 14" Rear Display Bezel Replacement: 手順 4、 1の画像 1
    • Lift the rear bezel off the display.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

3人の作成者と共同で作成されました。

Andrew Bookholt

585,718 ポイント

619のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 36