メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

The enTourage Pocket eDGe may experience battery failure. If you need to replace the battery of your enTourage Pocket eDGe for any reason, follow this guide.

  1. Make sure the device is powered off before beginning. Open the Pocket Edge and place device with the screens face down. The side containing the stylus should be on the left. Remove all eight elliptical rubber tabs covering screws using your finger or spudger.
    • Make sure the device is powered off before beginning.

    • Open the Pocket Edge and place device with the screens face down. The side containing the stylus should be on the left.

    • Remove all eight elliptical rubber tabs covering screws using your finger or spudger.

  2. Using your J1 Phillips head screwdriver, remove all eight 6mm screws from the back of your device.
    • Using your J1 Phillips head screwdriver, remove all eight 6mm screws from the back of your device.

  3. The Essential Toolkit

    コンパクト版iFixitキットの中で最も利便性の高いツール

    ショップを見る

    The Essential Toolkit

    コンパクト版iFixitキットの中で最も利便性の高いツール

    ショップを見る
  4. Using the plastic opening tool, lift the back plate from both sides of your device and remove them. Using the plastic opening tool, lift the back plate from both sides of your device and remove them. Using the plastic opening tool, lift the back plate from both sides of your device and remove them.
    • Using the plastic opening tool, lift the back plate from both sides of your device and remove them.

  5. Locate the side containing the battery. Lift the top of the battery out using your finger and the indentation at the top.
    • Locate the side containing the battery. Lift the top of the battery out using your finger and the indentation at the top.

  6. Carefully unplug the bottom side of the battery from the connecting plug and set the disconnected battery aside.
    • Carefully unplug the bottom side of the battery from the connecting plug and set the disconnected battery aside.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Adrian Do

メンバー登録日: 2015年09月24日

337 ポイント

3のガイドは作成済み

チーム

University of Alabama, Team 1-3, Sydow campbell Fall 2015 University of Alabama, Team 1-3, Sydow campbell Fall 2015人のメンバー

UA-SYDOW CAMPBELL-F15S1G3

4 メンバー

3のガイドは作成済み

コメント1件

Great tutorial! I have two of these. Does anyone know where I can buy a replacement battery? I have looked everywhere. I would retrofit if I could find one large and flat enough. 7.2v 2000mA. Hate to have to trash them but they don’t make parts anymore.

Ron - 返信

コメントを追加

統計データを表示:

過去 24時間: 1

過去 7 日: 1

過去 30 日: 7

今までの合計 1,001