メインコンテンツにスキップ

手順 3 への変更

- Catherine Keenanによって編集

承認済みの編集 : Adam O'Camb

削除
追加
変更なし

手順ライン

[* blackblue] Carefully slide the LCD out of its holder until the connector, highlighted in blue, is visible. Open the clip on the connector by pulling it with your fingernail to the right of the screen.
[* blackblue] Carefully slide the LCD out of its holder until the connector, highlighted in blue, is visible. Open the clip on the connector by pulling it with your fingernail to the right of the screen.
[* black] Remove the damaged LCD and insert the replacement.
[* black] After clipping the connector again, reassemble the camera using the six (6) previously removed screws.