メインコンテンツにスキップ

手順 2 への変更

- Brianna Althausによって編集

承認済みの編集 : Jeff Suovanen

削除
追加
変更なし

手順ライン

[* red] Remove the two screws on the bottom.
[* black] Start splitting the case from the battery compartment. No special tool is necessary. It should easily separate.
[* black] HerePictured in the third image is the rear case separate from the camera. The LCD is immediately visible.
[* black] HerePictured in the third image is the rear case separate from the camera. The LCD is immediately visible.