メインコンテンツにスキップ

手順 2 への変更

- Catherine Keenanによって編集

承認済みの編集 : Adam O'Camb

削除
追加
変更なし

手順ライン

[* black] Remove the two (2) screws from the bottom of the camera.
[* black] Start splittingSplit the case from the battery compartment. No special tool is necessary. It should easily separate.
[* black] Pictured in the third image is
compartment carefully until the rear case separateis separated from the camera. The LCD is immediately visiblerest of the camera, as shown in the third image.
[* black] Remove the two (2) screws from the bottom of the camera.
[* black] Start splittingSplit the case from the battery compartment. No special tool is necessary. It should easily separate.
[* black] Pictured in the third image is
compartment carefully until the rear case separateis separated from the camera. The LCD is immediately visiblerest of the camera, as shown in the third image.