手順4に変更
- Kyle Smithによって編集
承認済みの編集 : Kyle Smith
- 前
- 後
- 変更なし
手順ライン
| + | [* black] Use a spudger to loosen the two plastic tabs next to the induction coil that secure the internal assembly to the frame. |
|---|---|
| [* black] Push on the rotating head in order to pop the assembly out of the black plastic casing. | |
| [* icon_caution] You can also use a spudger to leverage the assembly out, but this may break the copper wire connected to the induction coil, so be careful. |