手順1に変更
- Adam O'Cambによって編集
承認済みの編集 : Adam O'Camb
- 前
- 後
- 変更なし
手順ライン
| [* red] Remove four 2.7 mm screws, two on each side, from the camera with a JIS 000 screwdriver. | |
| [* orange] Remove one 3.5 mm screw on the bottom of the camera with a JIS 000 screwdriver. | |
| + | [* icon_note] When removing the front and back housings, be careful to not break the tabs that hook into the top section of the chassis. |