手順1に変更
Brett Hartt — さんによる編集
承認済みの編集 : Brett Hartt
- 前
- 後
- 変更なし
手順ライン
| [* black] Wedge the flat end of a spudger |
| [* black] Wedge the flat end of a spudger |
| [* black] Run the flat end of a spudger along the top edge of the battery to separate it from the adhesive securing it to the front panel assembly. |
| [* icon_caution] Do not excessively bend the battery connector board. Be especially careful when prying up around the top left edge of the battery. |