手順1に変更
Walter Galan — さんによる編集
承認済みの編集 : Walter Galan
- 前
- 後
- 変更なし
手順ライン
[* black] Wedge the flat end of a spudger underneath the battery and the front panel assembly. |
[* black] Run the flat end of a spudger along the top edge of the battery to completely separate it from the adhesive securing it to the front panel assembly. |
[* icon_caution] Do not excessively bend the battery connector board. Be especially careful when prying up around the top left edge of the battery. |
画像1
以前の画像はありません
追加