メインコンテンツにスキップ

手順2に変更

Jake Devincenziさんによる編集

承認済みの編集 : Jake Devincenzi

変更なし

手順ライン

+[* icon_caution] Beware, as the Touch will be very hot. It may be helpful to hold it with a towel while prying.
+[* black] Insert the edge of an iPod opening tool between the front glass panel and the black plastic bezel near the home button.
+[* icon_caution] Do not try to pry between the black plastic bezel and the steel rear case.
+[* black] Pry the bottom edge of the front panel upward, being careful not to bend the glass excessively.
+[* icon_note] If it is too difficult to pry up the front panel assembly, reheat it and try again.

画像1

以前の画像はありません

追加

画像2

以前の画像はありません

追加