メインコンテンツにスキップ

手順7に変更

Walter Galanさんによる編集

承認済みの編集 : Walter Galan

変更なし

手順ライン

-[* red] Remove the outer four 5.3 mm T8 Torx screws holding the hinges in place.
-[* icon_note] Do not remove the two inner-most screws just yet.
-[* black] Open the device between 90 and 100 degrees, then rest it on its side.
-[* red] While supporting both halves of the device with one hand, unscrew the upper 5.3 mm T8 Torx screw.
-[* red] Repeat the same process for the identical bottom screw.
- [* icon_caution] Be sure to hold the display and upper case together with one hand. Failure to do so may cause the freed display/upper case to fall, potentially damaging each component.
+[* red] Remove four out of the six 5.3 mm T8 Torx screws securing the display to the upper case.
+[* icon_note] We purposely have you leave one screw attaching the display to the upper case to aid in future steps.

画像2

削除済み

画像3

削除済み