メインコンテンツにスキップ

手順2に変更

Walter Galanさんによる編集

承認済みの編集 : Walter Galan

変更なし

手順ライン

-[* black] Carefully slide a plastic opening tool under the thick part of the microphone cable.
+[* black] Insert the edge of a plastic opening tool underneath the upper microphone.
+[* black] Slide the blade of a plastic opening tool along the bottom of the upper microphone, releasing the adhesive.
[* icon_caution] Be careful when releasing the adhesive holding the cable down, as these cables have been known to tear easily.
-[* black] Slide the plastic opening tool along the length of the cable until you release all of the adhesive.
+[* black] In a similar manner, release the adhesive underneath the lower microphone.
[* black] Lift the cable out of the device.